M5 + 4 kg Filament

I read all the reviews and watched the videos on this product and they weren't wrong. I own an M5 which was cheap and fun to get into the hobby but this printer is waaaaayyyyy better.

1. IT looks really nice and clean well put together and crisp
2. Magnetic plate bed is really helpful with large builds.
3.it came super quickly through AnkerMake without any problems
4. The resolution of the prints is far better than I was able to do before.
5. The speed is really impressive and the display updates and tells you what speed it is currently doing, which is cool.
6. The ai is cool, it isn't perfect but I'm sure iture updates will make it better. I bought it for all the other features so I'm not fussed.

Some people mentioned the fans being loud. All printers make noise, this one is marginally louder than the ender. It doesn't bother me at all and I have it on my office next to me, since it's like white noise it doesn't bother me or the family.

Also this printer was way cheaper than an prusa and I think think the quick install and software ai helper etc it's better value for money in my mind.
Hope this helps.

This is my first 3D printer. I really like the Ankermake M5, it’s super easy to use, and set up. There’s some troubleshooting every now and then, but compared to my buddies with other printers, it’s nowhere near as much.

Anker has a lot of resources on how to disassemble, replace and/or troubleshoot things. Their customer support is also really good in my experience. I ended up buying their filament later on, had an issue with it and they replaced it for me in less than a week.

I wouldn’t say it’s worth the $800, but if you see it for $600 or less, I would highly recommend it. The print quality varies based on what you give it, but it ranges from amazing to decent. Over all, I’m happy with it, and if it’s your first 3D printer, definitely go for it! I’m planning on buying another one when I have the money.

This is my second day with this and it is so much fun. Setup was a breeze and I was printing within an hour of opening the box. Simple set up.. Takes a minute to get the hang of loading rhe filament but no big deal really. I was impressed with the speed before I found out it's running at 50 percent. Not nearly as noisy as I expected after seeing a lot of reviews on you tube. Clean, good-looking machine and I'm glad I went for the slightly more expensive version with the touch screen. Easy connection to my WI FI. Ran through the supplied filament quickly but was able to get more overnight through AnkerMake even though I ordered it after 5 pm. The app comes with lots of fun things to print.
This thing is amazing so stock up on filament is the only thing I have to say.

This was my first intro into 3D printing. I took advantage of the Halloween pricing specials and purchased the M5 with additional filament and nozzles. Within the first 45 minutes I was already running a print job from my iPhone and that included assembly, setup, firmware downloads and selecting a model to try and print. Completely blown away at how cool 3D printing is let alone the quality that the M5 produces without breaking the bank.

so happy I ended up going with this printer. Been printing for the past 3 months non stop and loving every print.

I had a print build up and needed a new nozzle head, contacted customer support and they replaced it for me. Customer service is ELITE with anker. They took care of it fast. AnkerMake is the GOAT.

I read all the reviews and watched the videos on this product and they weren't wrong. I own an M5 which was cheap and fun to get into the hobby but this printer is waaaaayyyyy better.

1. IT looks really nice and clean well put together and crisp
2. Magnetic plate bed is really helpful with large builds.
3.it came super quickly through AnkerMake without any problems
4. The resolution of the prints is far better than I was able to do before.
5. The speed is really impressive and the display updates and tells you what speed it is currently doing, which is cool.
6. The ai is cool, it isn't perfect but I'm sure iture updates will make it better. I bought it for all the other features so I'm not fussed.

Some people mentioned the fans being loud. All printers make noise, this one is marginally louder than the ender. It doesn't bother me at all and I have it on my office next to me, since it's like white noise it doesn't bother me or the family.

Also this printer was way cheaper than an prusa and I think think the quick install and software ai helper etc it's better value for money in my mind.
Hope this helps.

This is my first 3D printer. I really like the Ankermake M5, it’s super easy to use, and set up. There’s some troubleshooting every now and then, but compared to my buddies with other printers, it’s nowhere near as much.

Anker has a lot of resources on how to disassemble, replace and/or troubleshoot things. Their customer support is also really good in my experience. I ended up buying their filament later on, had an issue with it and they replaced it for me in less than a week.

I wouldn’t say it’s worth the $800, but if you see it for $600 or less, I would highly recommend it. The print quality varies based on what you give it, but it ranges from amazing to decent. Over all, I’m happy with it, and if it’s your first 3D printer, definitely go for it! I’m planning on buying another one when I have the money.

This is my second day with this and it is so much fun. Setup was a breeze and I was printing within an hour of opening the box. Simple set up.. Takes a minute to get the hang of loading rhe filament but no big deal really. I was impressed with the speed before I found out it's running at 50 percent. Not nearly as noisy as I expected after seeing a lot of reviews on you tube. Clean, good-looking machine and I'm glad I went for the slightly more expensive version with the touch screen. Easy connection to my WI FI. Ran through the supplied filament quickly but was able to get more overnight through AnkerMake even though I ordered it after 5 pm. The app comes with lots of fun things to print.
This thing is amazing so stock up on filament is the only thing I have to say.

This was my first intro into 3D printing. I took advantage of the Halloween pricing specials and purchased the M5 with additional filament and nozzles. Within the first 45 minutes I was already running a print job from my iPhone and that included assembly, setup, firmware downloads and selecting a model to try and print. Completely blown away at how cool 3D printing is let alone the quality that the M5 produces without breaking the bank.

so happy I ended up going with this printer. Been printing for the past 3 months non stop and loving every print.

I had a print build up and needed a new nozzle head, contacted customer support and they replaced it for me. Customer service is ELITE with anker. They took care of it fast. AnkerMake is the GOAT.

I read all the reviews and watched the videos on this product and they weren't wrong. I own an M5 which was cheap and fun to get into the hobby but this printer is waaaaayyyyy better.

1. IT looks really nice and clean well put together and crisp
2. Magnetic plate bed is really helpful with large builds.
3.it came super quickly through AnkerMake without any problems
4. The resolution of the prints is far better than I was able to do before.
5. The speed is really impressive and the display updates and tells you what speed it is currently doing, which is cool.
6. The ai is cool, it isn't perfect but I'm sure iture updates will make it better. I bought it for all the other features so I'm not fussed.

Some people mentioned the fans being loud. All printers make noise, this one is marginally louder than the ender. It doesn't bother me at all and I have it on my office next to me, since it's like white noise it doesn't bother me or the family.

Also this printer was way cheaper than an prusa and I think think the quick install and software ai helper etc it's better value for money in my mind.
Hope this helps.

This is my first 3D printer. I really like the Ankermake M5, it’s super easy to use, and set up. There’s some troubleshooting every now and then, but compared to my buddies with other printers, it’s nowhere near as much.

Anker has a lot of resources on how to disassemble, replace and/or troubleshoot things. Their customer support is also really good in my experience. I ended up buying their filament later on, had an issue with it and they replaced it for me in less than a week.

I wouldn’t say it’s worth the $800, but if you see it for $600 or less, I would highly recommend it. The print quality varies based on what you give it, but it ranges from amazing to decent. Over all, I’m happy with it, and if it’s your first 3D printer, definitely go for it! I’m planning on buying another one when I have the money.

This is my second day with this and it is so much fun. Setup was a breeze and I was printing within an hour of opening the box. Simple set up.. Takes a minute to get the hang of loading rhe filament but no big deal really. I was impressed with the speed before I found out it's running at 50 percent. Not nearly as noisy as I expected after seeing a lot of reviews on you tube. Clean, good-looking machine and I'm glad I went for the slightly more expensive version with the touch screen. Easy connection to my WI FI. Ran through the supplied filament quickly but was able to get more overnight through AnkerMake even though I ordered it after 5 pm. The app comes with lots of fun things to print.
This thing is amazing so stock up on filament is the only thing I have to say.

This was my first intro into 3D printing. I took advantage of the Halloween pricing specials and purchased the M5 with additional filament and nozzles. Within the first 45 minutes I was already running a print job from my iPhone and that included assembly, setup, firmware downloads and selecting a model to try and print. Completely blown away at how cool 3D printing is let alone the quality that the M5 produces without breaking the bank.

so happy I ended up going with this printer. Been printing for the past 3 months non stop and loving every print.

I had a print build up and needed a new nozzle head, contacted customer support and they replaced it for me. Customer service is ELITE with anker. They took care of it fast. AnkerMake is the GOAT.

I read all the reviews and watched the videos on this product and they weren't wrong. I own an M5 which was cheap and fun to get into the hobby but this printer is waaaaayyyyy better.

1. IT looks really nice and clean well put together and crisp
2. Magnetic plate bed is really helpful with large builds.
3.it came super quickly through AnkerMake without any problems
4. The resolution of the prints is far better than I was able to do before.
5. The speed is really impressive and the display updates and tells you what speed it is currently doing, which is cool.
6. The ai is cool, it isn't perfect but I'm sure iture updates will make it better. I bought it for all the other features so I'm not fussed.

Some people mentioned the fans being loud. All printers make noise, this one is marginally louder than the ender. It doesn't bother me at all and I have it on my office next to me, since it's like white noise it doesn't bother me or the family.

Also this printer was way cheaper than an prusa and I think think the quick install and software ai helper etc it's better value for money in my mind.
Hope this helps.

This is my first 3D printer. I really like the Ankermake M5, it’s super easy to use, and set up. There’s some troubleshooting every now and then, but compared to my buddies with other printers, it’s nowhere near as much.

Anker has a lot of resources on how to disassemble, replace and/or troubleshoot things. Their customer support is also really good in my experience. I ended up buying their filament later on, had an issue with it and they replaced it for me in less than a week.

I wouldn’t say it’s worth the $800, but if you see it for $600 or less, I would highly recommend it. The print quality varies based on what you give it, but it ranges from amazing to decent. Over all, I’m happy with it, and if it’s your first 3D printer, definitely go for it! I’m planning on buying another one when I have the money.

This is my second day with this and it is so much fun. Setup was a breeze and I was printing within an hour of opening the box. Simple set up.. Takes a minute to get the hang of loading rhe filament but no big deal really. I was impressed with the speed before I found out it's running at 50 percent. Not nearly as noisy as I expected after seeing a lot of reviews on you tube. Clean, good-looking machine and I'm glad I went for the slightly more expensive version with the touch screen. Easy connection to my WI FI. Ran through the supplied filament quickly but was able to get more overnight through AnkerMake even though I ordered it after 5 pm. The app comes with lots of fun things to print.
This thing is amazing so stock up on filament is the only thing I have to say.

This was my first intro into 3D printing. I took advantage of the Halloween pricing specials and purchased the M5 with additional filament and nozzles. Within the first 45 minutes I was already running a print job from my iPhone and that included assembly, setup, firmware downloads and selecting a model to try and print. Completely blown away at how cool 3D printing is let alone the quality that the M5 produces without breaking the bank.

so happy I ended up going with this printer. Been printing for the past 3 months non stop and loving every print.

I had a print build up and needed a new nozzle head, contacted customer support and they replaced it for me. Customer service is ELITE with anker. They took care of it fast. AnkerMake is the GOAT.

I read all the reviews and watched the videos on this product and they weren't wrong. I own an M5 which was cheap and fun to get into the hobby but this printer is waaaaayyyyy better.

1. IT looks really nice and clean well put together and crisp
2. Magnetic plate bed is really helpful with large builds.
3.it came super quickly through AnkerMake without any problems
4. The resolution of the prints is far better than I was able to do before.
5. The speed is really impressive and the display updates and tells you what speed it is currently doing, which is cool.
6. The ai is cool, it isn't perfect but I'm sure iture updates will make it better. I bought it for all the other features so I'm not fussed.

Some people mentioned the fans being loud. All printers make noise, this one is marginally louder than the ender. It doesn't bother me at all and I have it on my office next to me, since it's like white noise it doesn't bother me or the family.

Also this printer was way cheaper than an prusa and I think think the quick install and software ai helper etc it's better value for money in my mind.
Hope this helps.

This is my first 3D printer. I really like the Ankermake M5, it’s super easy to use, and set up. There’s some troubleshooting every now and then, but compared to my buddies with other printers, it’s nowhere near as much.

Anker has a lot of resources on how to disassemble, replace and/or troubleshoot things. Their customer support is also really good in my experience. I ended up buying their filament later on, had an issue with it and they replaced it for me in less than a week.

I wouldn’t say it’s worth the $800, but if you see it for $600 or less, I would highly recommend it. The print quality varies based on what you give it, but it ranges from amazing to decent. Over all, I’m happy with it, and if it’s your first 3D printer, definitely go for it! I’m planning on buying another one when I have the money.

This is my second day with this and it is so much fun. Setup was a breeze and I was printing within an hour of opening the box. Simple set up.. Takes a minute to get the hang of loading rhe filament but no big deal really. I was impressed with the speed before I found out it's running at 50 percent. Not nearly as noisy as I expected after seeing a lot of reviews on you tube. Clean, good-looking machine and I'm glad I went for the slightly more expensive version with the touch screen. Easy connection to my WI FI. Ran through the supplied filament quickly but was able to get more overnight through AnkerMake even though I ordered it after 5 pm. The app comes with lots of fun things to print.
This thing is amazing so stock up on filament is the only thing I have to say.

This was my first intro into 3D printing. I took advantage of the Halloween pricing specials and purchased the M5 with additional filament and nozzles. Within the first 45 minutes I was already running a print job from my iPhone and that included assembly, setup, firmware downloads and selecting a model to try and print. Completely blown away at how cool 3D printing is let alone the quality that the M5 produces without breaking the bank.

so happy I ended up going with this printer. Been printing for the past 3 months non stop and loving every print.

I had a print build up and needed a new nozzle head, contacted customer support and they replaced it for me. Customer service is ELITE with anker. They took care of it fast. AnkerMake is the GOAT.

I read all the reviews and watched the videos on this product and they weren't wrong. I own an M5 which was cheap and fun to get into the hobby but this printer is waaaaayyyyy better.

1. IT looks really nice and clean well put together and crisp
2. Magnetic plate bed is really helpful with large builds.
3.it came super quickly through AnkerMake without any problems
4. The resolution of the prints is far better than I was able to do before.
5. The speed is really impressive and the display updates and tells you what speed it is currently doing, which is cool.
6. The ai is cool, it isn't perfect but I'm sure iture updates will make it better. I bought it for all the other features so I'm not fussed.

Some people mentioned the fans being loud. All printers make noise, this one is marginally louder than the ender. It doesn't bother me at all and I have it on my office next to me, since it's like white noise it doesn't bother me or the family.

Also this printer was way cheaper than an prusa and I think think the quick install and software ai helper etc it's better value for money in my mind.
Hope this helps.

This is my first 3D printer. I really like the Ankermake M5, it’s super easy to use, and set up. There’s some troubleshooting every now and then, but compared to my buddies with other printers, it’s nowhere near as much.

Anker has a lot of resources on how to disassemble, replace and/or troubleshoot things. Their customer support is also really good in my experience. I ended up buying their filament later on, had an issue with it and they replaced it for me in less than a week.

I wouldn’t say it’s worth the $800, but if you see it for $600 or less, I would highly recommend it. The print quality varies based on what you give it, but it ranges from amazing to decent. Over all, I’m happy with it, and if it’s your first 3D printer, definitely go for it! I’m planning on buying another one when I have the money.

This is my second day with this and it is so much fun. Setup was a breeze and I was printing within an hour of opening the box. Simple set up.. Takes a minute to get the hang of loading rhe filament but no big deal really. I was impressed with the speed before I found out it's running at 50 percent. Not nearly as noisy as I expected after seeing a lot of reviews on you tube. Clean, good-looking machine and I'm glad I went for the slightly more expensive version with the touch screen. Easy connection to my WI FI. Ran through the supplied filament quickly but was able to get more overnight through AnkerMake even though I ordered it after 5 pm. The app comes with lots of fun things to print.
This thing is amazing so stock up on filament is the only thing I have to say.

This was my first intro into 3D printing. I took advantage of the Halloween pricing specials and purchased the M5 with additional filament and nozzles. Within the first 45 minutes I was already running a print job from my iPhone and that included assembly, setup, firmware downloads and selecting a model to try and print. Completely blown away at how cool 3D printing is let alone the quality that the M5 produces without breaking the bank.

so happy I ended up going with this printer. Been printing for the past 3 months non stop and loving every print.

I had a print build up and needed a new nozzle head, contacted customer support and they replaced it for me. Customer service is ELITE with anker. They took care of it fast. AnkerMake is the GOAT.